A Kamar®  Heatmount®  Detector is a pressure sensitive device with a built-in timing mechanism designed to be activated by standing heat behavior. Once glued onto the tailhead, the pressure from a mounting animal will turn the detector from white to red. It takes approximately three seconds of pressure to activate the timing mechanism. This feature helps distinguish between true standing heat and false mounting activity.

In a Journal of Dairy Science report, the University of Maryland indicated efficiency of the Kamar Heatmount Detector was as high as 84 percent when combined with visual observation. Use of visual observation alone had a 68 percent efficiency rate in the same study.

Application Procedures

• Clean tailhead with a curry comb to remove dirt and loose hair.
• Use the provided gauge to locate proper position to apply the detector on the tailhead.
• Apply adhesive to the animal's back at the indicated spot.
• Using the enclosed spreader, work the adhesive into the hair towards the cow's tail.
• Apply a lesser amount of adhesive to the back of the detector.
• Place the detector on the prepared area of the cow making sure the arrow on the detector is pointing forward (towards the cow's head).
• Press firmly down on the canvas portion of the detector. Do not press on the plastic bubble.

Additional information can be found at www.kamarinc.com.

 Purchase Kamars now on Profit Shop, contact your Genex representative or call customer service at 1-888-333-1783.